|
CDG025-C
All Ceramic Capacitance Diaphragm Gauge
(Analog)
|
*Range:133322,13332.2,
1333.22,133.322,
ATM13332.2 Pa
(Full Scale)
*Temp.:
Operation:5~50℃
At flange: ≦110℃
Storage:-40~65℃
*Protection Type: IP30
|
*Power Supply: 15±5% VDC, 18~26.4 VDC, Power Consumption ≦1.6 W.
*Output signal: 0~10 V
*Electrical connection:
D-Sub, 15 pin, male.
*Fitting: 1/2” tube.
|
*No metal contamination.
*Marginal zero drift
*Virtually corrosion proof – long sensor life results in reduced downtime thus reducing cost of ownership
*Superior accuracy and repeatability over long period of operation.
*Better long term and temperature stability.
*Less sensitive to frequent pressure cycles to atmosphere may.
|
|
CDG025D
CDG250D-S
Capacitance Diaphragm Gaug(Digital)
|
*Range: 0.13~1333 mbar.
*Temp.:
Operation:5~50℃
Storage:-40~65℃
Bakeout:≦110℃
*Fitting:1/2” tube, 8 VCR
*Flange: DN 16 ISO-KF,
DN 16 CF-R.
|
*Power Supply: 14~30 VDC or ±15V(±5%).
*Output Signal: 0~10 VDC.
*Electrical connection:
D-Sub, 15 pin, male
*CDG250D-S with RS232 interface and two setpoint: Relay:30 VDC/≦0.5 ADC. Hysteresis:1% of F.S.
*Protection Type: IP30.
|
*Fast stability after power on.
*Fast recovery from atmospheric pressure.
*Corrosion resistant ceramic sensor.
*Excellent long term signal stability.
*Temperature compensated.
*Sensor protected from contamination.
*One pushbutton zero function.
*Wide range power supply.
*2 setpoints (optional).
*RS232 interface (optional).
|
|
CDG045D
CDG100D
Capacitance Diaphragm Gauge(Digital)
|
*Range:
-Torr based: 0.13~1333 or 0.33~666.61 mbar.
-mbar based:0.1~1100 mbar.
*Temp.:
Operation:10~50℃.
Storage:-40~65℃.
Sensor:
-CDG045D:45℃
-CDG100D:100℃
Bakeout: ≦110℃.
*Fitting:1/2” tube, 8 VCR
*Flange: DN 16 ISO-KF,
DN 16 CF-R.
|
*Power Supply: 14~30 VDC or ±15V(±5%).
*Output Signal: 0~10 VDC.
*Interface:RS-232C(Standard), DeviceNetTM,Profibus DP.
*Electrical connection:
-CDG:D-Sub, 15 pin, male -DeviceNetTM: microstyle, 5 pin, male.
-Profibus DP:D-sub,9 pin female.
*Protection Type: IP40.
*Cable length:100 m.
|
*Easy integration, wide variety of full scales, flanges and interfaces, standard with two set points.
*Easy one push button or remote signal zero command, zero offset adjustable
*Diagnostic port for quick service and maintenance.
*No long term recalibration due to excellent signal stability and repeatability, even in harsh plasma applications.
*Compliance & standards: CE, EN, UL, SEMI, RoHS
|
|
CDG160D
CDG200D
High Temperature Capacitance Diaphragm Gauge(Digital)
|
*Range: 1.3~1333 mbar.
*Temp.:
Operation:10~50℃
Storage:-40~65℃
Bakeout: ≦200℃
Sensor:
-CDG160D:160℃
-CDG200D:200℃
*Fitting: 1/2” tube , 8 VCR.
*Flange:DN16 ISO-KF, DN16 CF-R.
|
*Supply: +21 … +30 VDC or ±15 V
(±5%)
*Output: 0~10 V.
*Interface:RS232C(Standard)
DeviceNetTM.
*Electrical connection:
D-Sub, 15 pin, male for CDG
Microstyle, 5 pin male for DeviceNetTM.
*Protection Type: IP40.
*Cable Length: 100 m (Max)
|
*Lower CoO (cost of ownership), 50% faster warm up, energy efficient low power consumption.
*Easy integration, wide variety of full scales, flanges and interfaces, standard with two set points.
*Easy one push button or remote signal zero command, zero offset adjustable.
*Diagnostic port for quick service and maintenance.
|
|
CDG500
Temperature Compensated Capacitance Diaphragm Gauge
(Digital)
|
*Range: 1333~1.3mbar.
*Temp.:
Operation:5~50℃
Storage:-40~65℃
Bakeout:≦110℃
*Connection:KF16/VCR8
|
*Supply: 14~30 VDC
*Output: 0~10 VDC.
*Two setpoint:
Relay:30 VDC;≦0.5 ADC.
Hysteresis: 1% of F.S.
*Electrical connection:
D-Sub, 15 pin, male.
*Protection Type: IP30.
|
*Full scale ranges from 1 to 1000 Torr with push button Ease of integration zeroing and optional set point control.
*Excellent long term signal stability and repeatability.
*Fast recovery from atmospheric pressures and rapid stabilization after start-up.
*Corrosion resistant ceramic sensor with sensor shielding protection.
|
電容式真空計
